Cisco Training Courses

The Introduction to 802.1X Operations for Cisco Security Professionals (802.1X) v2.0 shows you how to configure and prepare to deploy Cisco® Identity-Based Networking Services (IBNS) solutions based on Cisco Identity Services Engine (ISE), Cisco Catalyst switches, and Cisco Wireless LAN Controllers. You will learn the fundamentals of the 802.1X protocol and configuration, Cisco IBNS, configuring access for non-supplicant devices, Cisco ISE deployment options, architectural components, considerations with 802.1X, and more. You will also gain hands-on experience configuring 802.1Xbased network services using the Cisco Identity Services Engine and a Cisco Catalyst switch.

The Cisco Aggregation Services Router 9000 Series Essentials (ASR9KE) v6.1 course introduces you to the features and functions of the Cisco® Aggregation Services Router (ASR) 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware, Layer 2 and Layer 3 services, routing protocols including Segment Routing, Layer 2 and Layer 3 multicast, Quality of Service (QoS) features, and network virtualization. The course investigates Cisco Internetworking Operating System (IOS) XR 64-Bit Linux-based feature parity in the environment, as well as how to install Cisco IOS® XR 64-Bit software packages.

The Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS) v1.0 course teaches you security concepts, common network and application operations and attacks, and the types of data needed to investigate security incidents. This course teaches you how to monitor alerts and breaches, and how to understand and follow established procedures for response to alerts converted to incidents. Through a combination of lecture, hands-on labs, and self-study, you will learn the essential skills, concepts, and technologies to be a contributing member of a Cybersecurity Operations Center (SOC) including understanding the IT infrastructure, operations, and vulnerabilities. This course helps you prepare for the Cisco Certified CyberOps Associate certification and the role of a Junior or Entry-level cybersecurity operations analyst in a SOC. This course also earns you 30 Continuing Education (CE) credits towards recertification.

The Administering Cisco Contact Center Enterprise (CCEA) v1.0 course teaches you the contextual information around call flow between components in the Cisco® Unified Contact Center Enterprise (UCCE) solution including intelligent contact routing, call treatment, network-to-desktop Computer Telephony Integration (CTI), and multichannel contact management over an IP infrastructure. You receive hands-on practice using administrative tools to perform routine adds, moves, and changes in an inbound contact center environment.

The Designing Cisco Data Center Infrastructure (DCID) v7.0 course helps you master design and deployment options focused on Cisco® data center solutions and technologies across network, compute, virtualization, storage area networks, automation, and security. You will learn design practices for the Cisco Unified Computing System™ (Cisco UCS®) solution based on Cisco UCS B-Series and C-Series servers, Cisco UCS Manager, and Cisco Unified Fabric. You will also gain design experience with network management technologies including Cisco UCS Manager, Cisco Data Center Network Manager (DCNM), and Cisco UCS Director. You can expect theoretical content as well as design-oriented case studies in the form of activities. This course earns you 40 Continuing Education (CE) credits towards recertification.This course helps you prepare to take the exam:

• 300-610 Designing Cisco Data Center Infrastructure (DCID)

The Implementing Cisco HyperFlex (DCIHX) v1.3 course shows you how to deploy and use the Cisco® HyperFlex™ data platform to support multicloud workloads. You will become familiar with HyperFlex components and learn how to install, design, manage, and troubleshoot Cisco HyperFlex to support highly scalable and resilient multicloud implementations. You will also gain hands-on experience focused on installation, management, maintenance, and native replication, and you will explore cluster technologies as well as Cisco Intersight.™

The Introducing Cisco Nexus 9000 Switches in NX-OS Mode (DCINX9K) v2.1 course shows you how to implement, manage, and troubleshoot Cisco Nexus® 9000 Series Switches in Cisco® NX-OS mode. Through expert instruction and extensive hands-on learning, you will learn how to deploy capabilities including Virtual Extensible LAN (VXLAN), Multiprotocol Label Switching (MPLS), high availability features, Intelligent Traffic Director, troubleshooting tools and techniques, NX-OS programmability features, and open interface technologies. The course also provides an introduction to Cisco Data Center Network Manager (DCNM) for management.

The Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0 course shows you how to troubleshoot LAN, SAN, Cisco® Data Center Unified Fabric, Cisco Unified Computing System™ (Cisco UCS®), and Cisco Application-Centric Infrastructure (Cisco ACI®).You will learn methodologies and tools to identify issues that may occur in data center network architecture. You will get extensive hands-on practice troubleshooting installation, configuration and interconnectivity issues on Cisco Multilayer Director Switch (MDS) switches, Cisco Nexus® switches, Cisco Fabric Extenders (FEXs), Cisco UCS, Cisco ACI, and more.This course helps prepare you to take the exam:

• 300-615 Troubleshooting Cisco Data Center Infrastructure (DCIT)

The Developing Applications using Cisco Core Platforms and APIs (DEVCOR) v1.0 course helps you prepare for Cisco DevNet Professional certification and for professional-level network automation engineer roles. You will learn how to implement network applications using Cisco® platforms as a base, from initial software design to diverse system integration, as well as testing and deployment automation. The course gives you hands-on experience solving real world problems using Cisco Application Programming Interfaces (APIs) and modern development tools.This course helps you prepare to take the 350-901 Developing Applications using Cisco Core Platforms and APIs (DEVCOR) exam. By passing this exam, you satisfy the core exam requirement toward Cisco Certified DevNet Professional, and you earn the Cisco Certified DevNet Specialist Core certification. This course also earns you 64 Continuing Education (CE) credits towards recertification.

The Implementing Cisco Enterprise SD-Branch (ENSDBI) v1.0 course is designed to teach you to understand the Cisco® Software-Defined (SD)-Branch architecture and Cisco Enterprise Network Functions Virtualization (ENFV) solution. Through a series of in-person or e-learning lectures and labs, you will learn about the supported hardware platforms with a focus on the components, installation, and upgraded workflows of the Cisco Enterprise Network Compute System (ENCS) 5400 series. Additionally, this course will help you build your skills on Virtual Network Functions (VNF) deployment and orchestration solutions on Cisco ENCS.

The Cisco SD-WAN Operation and Deployment (ENSDW) v1.0 course provides an overview of the Cisco® Software-Defined WAN (SD-WAN) solution and SD-WAN components. You will learn how to create, manage, and operate a secure extensible network using Cisco SD-WAN products. The course covers how to configure, operate, and monitor overlay routing in a secure extensible network. In addition, you will learn about policies and Quality of Service (QoS) in the SD-WAN overlay network.The Cisco SD-WAN solution is a cloud-delivered overlay WAN architecture that facilitates digital and cloud transformation for enterprises. Cisco SD-WAN significantly reduces WAN costs and time to deploy new services. With Cisco SD-WAN, you can build a robust security architecture that’s crucial for hybrid networks and provides a strong policy framework.

The Implementing Cisco SD-WAN Solutions (ENSDWI) v2.0 course trains you to design, deploy, configure, and manage your Cisco® Software-Defined WAN (SD-WAN) solution in a large-scale live network, including how to migrate from legacy WAN to SD-WAN. You will learn best practices for configuring routing protocols in the data center and the branch, as well as how to implement advanced control, data, and application-aware policies. The course also covers SD-WAN deployment and migration options, placement of controllers, how to deploy WAN Edge devices, and how to configure Direct Internet Access (DIA) breakout. The course examines the different Cisco SD-WAN security options available, such as application-aware enterprise firewall, Intrusion Prevention System (IPS), URL filtering, Cisco Advanced Malware Protection (AMP), Secure Sockets Layer/Transport Layer Security (SSL/TLS) proxy, and Cisco Umbrella® Secure Internet Gateway (SIG).The course lab environment is built using Cisco vEdge Cloud routers and Cisco SD-WAN 20.3 code.This course helps you prepare to take the Implementing Cisco SD-WAN Solutions (300-415 ENSDWI) exam which is part of the CCNP® Enterprise certification. You will also earn 32 Continuing Education (CE) credits toward recertification.

The Designing Cisco Enterprise Networks (ENSLD) v1.1 course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course.This course also helps you prepare to take the 300-420 Designing Cisco Enterprise Networks (ENSLD) exam which is part of the CCNP® Enterprise and Cisco Certified Specialist – Enterprise Design certifications.

The Implementing Cisco Multiprotocol Label Switching (MPLS) v3.0 course teaches you the high-performance method for forwarding packets through a network. MPLS enables routers at the edge of a network to apply simple labels to packets. This practice allows the edge devices to switch packets according to labels, with minimal lookup overhead. MPLS integrates the performance and traffic-management capabilities of data link Layer 2 with the scalability and flexibility of network Layer 3 routing. When used in conjunction with other standard technologies, MPLS gives the ability to support value-added features.

The Cisco Network Services Orchestrator (NSO) Advance Python Programmers (NSO300) v4.0 course continues the learning journey of the NSO Essentials for Programmers and Network Architects (NSO201) v4.0 course with NSO to include customizing templates with Python programming, Docker deployment, and Nano services. You will learn to create advanced services using the NSO application framework and Python scripting with both new and existing Layer 3 Multiprotocol Label Switching (MPLS) VPN services. You will also learn how to manage and scale these services to reduce operation consumption, and increase both security and available physical space, since virtualized network functions (VNFs) replace physical hardware. You will use Network Functions Virtualization (NFV) orchestration features, and Cisco Elastic Services Controller (ESC) to manage virtualized network functions.

The Implementing Segment Routing on Cisco IOS XR (SEGRTE201) v2.0 course covers the fundamental concepts of segment routing (SR), how to configure and verify segment routing within an Interior Gateway Protocol (IGP), and the interworking of Label Distribution Protocol (LDP) with segment routing. You will learn how to implement topology-independent loop-free alternate (TI-LFA) using segment routing, and how to instantiate and verify segment routing traffic engineering policies. You will also learn how to implement segment routing within Border Gateway Protocol (BGP).

The Securing Email with Cisco Email Security Appliance (SESA) v3.1 course shows you how to deploy and use Cisco® Email Security Appliance to establish protection for your email systems against phishing, business email compromise, and ransomware, and to help streamline email security policy management. This hands-on course provides you with the knowledge and skills to implement, troubleshoot, and administer Cisco Email Security Appliance, including key capabilities such as advanced malware protection, spam blocking, anti-virus protection, outbreak filtering, encryption, quarantines, and data loss prevention.This course helps you prepare to take the exam, Securing Email with Cisco Email Security Appliance (300-720 SESA), which leads to CCNP® Security and the Certified Specialist – Email Content Security certifications. This course also earns you 24 Continuing Education (CE) credits towards recertification.

The Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW) v1.0 course shows you how to deploy and use Cisco Firepower® Threat Defense system. This hands-on course gives you knowledge and skills to use and configure Cisco® Firepower Threat Defense technology, beginning with initial device setup and configuration and including routing, high availability, Cisco Adaptive Security Appliance (ASA) to Cisco Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). You will learn how to implement advanced Next-Generation Firewall (NGFW) and Next-Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network-based malware detection, and deep packet inspection. You will also learn how to configure site-to-site VPN, remote-access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.This course helps you prepare to take the exam, Securing Networks with Cisco Firepower (300-710 SNCF), which leads to CCNP Security and Cisco Certified SpecialistNetwork Security Firepower certifications. The 300-710 SNCF exam has a second preparation course as well, Securing Networks with Cisco Firepower Next-Generation Intrusion Prevention System (SSFIPS). You can take these courses in any order. This course also earns you 40 Continuing Education (CE) credits towards recertification.

The Securing the Web with Cisco Web Security Appliance (SWSA) v3.0 course shows you how to implement, use, and maintain Cisco® Web Security Appliance (WSA), powered by Cisco Talos, to provide advanced protection for business email and control against web security threats. Through a combination of expert instruction and hands-on practice, you’ll learn how to deploy proxy services, use authentication, implement policies to control HTTPS traffic and access, implement use control settings and policies, use the solution’s anti-malware features, implement data security and data loss prevention, perform administration of Cisco WSA solution, and more.This course helps you prepare to take the exam, Securing the Web with Cisco Web Security Appliance (300-725 SWSA), which leads to CCNP® Security and the Cisco Certified Specialist – Web Content Security. This course also earns you 16 Continuing Education (CE) credits towards recertification.

The Understanding Cybersecurity Operations Fundamentals (CBROPS) v1.0 course teaches an understanding of the network infrastructure devices, operations, and vulnerabilities of the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. You will learn basic information about security concepts, common network application operations and attacks, the Windows and Linux operating systems, and the types of data used to investigate security incidents. After completing this course, you will have the basic knowledge required to perform the job role of an associate-level cybersecurity analyst in a threat-centric security operations center to strengthen network protocol, protect your devices and increase operational efficiency. This course prepares you for the Cisco Certified CyberOps Associate certification.

The Cisco Application Centric Infrastructure Operations and Troubleshooting (DCACIO) v5.2 course shows you how to manage, monitor, and troubleshoot Cisco® Nexus® 9000 Series Switches in Application-Centric Infrastructure (ACI) mode. Through expert instruction and hands-on practice, you will learn about operational tools, best practices, caveats, and practice troubleshooting common issues on a live fabric. Based on lessons learned in wide range of production deployments, this course gives you the real-world knowledge and skills to boost operational efficiencies in your own deployment.How You’ll BenefitThis course will help you:- Quickly ramp up on Cisco ACI® operational knowledge, skills, and best practices honed from real-world production deployments- Gain hands-on troubleshooting techniques- Optimize the benefits of using Cisco ACI, such as streamlined operations

The Troubleshooting Cisco Application-Centric Infrastructure (DCACIT) v5.2 course teaches you through a combination of lectures and labs the key components and procedures needed to troubleshoot Cisco Nexus 9000 Series Switches in Application-Centric Infrastructure (ACI) mode. This course is for advanced engineers who have installed and managed existing fabrics or for those who have completed the Implementing Cisco Application-Centric Infrastructure-Advanced (DCACI) course.This course will help you:- Learn how to design policy-driven automation to streamline the deployment lifecycle- Integrate a comprehensive solution using any hypervisor, supporting any workload, for any location, and in any cloud- Expand your knowledge of Cisco Nexus 9000 Series Switches

Cisco Stealthwatch Network Operations is an instructor-led, lab-based, hands-on course offered by the Cisco Stealthwatch Learning Services team. This two-day course is designed for customers who are new to the Stealthwatch System and face specific challenges related to network health and maintenance. The course focuses on using the Stealthwatch System to enhance visibility and execute the performance monitoring activities required to maintain network health and information security.This course is intended for individuals who are responsible for using the Stealthwatch System to monitor network performance and troubleshoot network issues.

The Implementing Automation for Cisco Service Provider Solutions (SPAUI) v1.0 course prepares you to implement and support automation solutions in a Service Provider network infrastructure, using network programmability principles, protocols, tools, and mechanisms. Through a combination of lessons and hands-on labs, you will learn to deploy, configure, monitor, and operate Service Provider network environments using modern data models. These models allow you to represent operational data and new network management protocols in order to administer hundreds or thousands of devices in a single operation, replacing traditional, time-consuming, error prone, device-by-device Command Line Interface (CLI) management. The course also introduces powerful automation solutions that can streamline network operations.This course covers Yet Another Next Generation (YANG) data models and validation tools, Representational State Transfer Configuration Protocol RESTCONF and Network Configuration Protocol (NETCONF) management protocols, model-driven telemetry with Google Remote Procedure Call (gRPC) and Google Network Management Interface (gNMI), traffic automation with XR Transport Control (XTC), Secure Shell (SSH)-based automation tools like NetMiko and Ansible, orchestration provided by Network Services Orchestration (NSO), Network Function Virtualization (NFV) lifecycle management with Elastic Services Controller (ESC), and network operations automation with WAN Automation Engine (WAE).This course prepares you for the 300-535 Automating and Programming Cisco® Service Provider Solutions (SPAUTO) exam.Introducing Automation for Cisco Solutions (CSAU) is required prior to enrolling in Implementing Automation for Cisco Service Provider Solutions (SPAUI) because it provides crucial foundational knowledge essential to success.

The Cisco Service Provider 5G Technologies Foundations (SPMBL100) v1.0 course introduces mobile network components, basic 5G concepts, and features of 5G technology including faster data speeds, higher device capacity, and improved user experience. You will examine the mobile packet core solutions, 5G transport architecture, and Cisco® automation and orchestration tools used in 5G networks. You will also learn about the Cisco 5G Non-standalone (NSA) and the Cisco Ultra Cloud Core 5G standalone (SA) platform solutions, the Cisco 5G converged Software-Defined Networking (SDN) transport architecture, and Cisco edge computing solutions. You will study the Cisco Network Function Virtualization (NFVI) architecture, Cisco Network Services Orchestrator (NSO), and Cisco Elastic Services Controller (ESC). You will learn how 5G is distributed with Telco Data Center (DC) with Cisco Application Centric Infrastructure (Cisco ACI®). And finally, Zero-Touch Provisioning (ZTP), Cisco Crosswork™, and the Cisco 5G security architecture will also be presented. How you’ll benefitThis course will help you:- Use the higher data speeds of 5G to access data more quickly and accommodate every device with increased capacity- Learn how 5G technology delivers lower latency, higher device capacity, and a more uniform user experience

This course focuses on using Cisco Stealthwatch Enterprise from the perspective of a security analyst. The overarching goal of the course is to use Stealthwatch to investigate potential security issues and make initial determinations of whether to proceed with a more thorough investigation or to move on to the next potential threat.

The Understanding Cisco Wireless Foundations (WLFNDU) v1.0 course gives you the knowledge and skills you need to position, plan, implement, operate, and manage a Cisco WLAN network. This course teaches you how to design, install, configure, monitor, and conduct basic troubleshooting tasks on a Cisco WLAN network of any size.

This course will cover the basics of installing and operation of the Cisco DNA Center (DNAC) running version 2.x. The Cisco DNAC is a stand-alone product that provides a single dashboard for every fundamental management task to simplify running an enterprise network. The DNAC is the management piece of the Software Defined Access (SDA) solution.

In this Installing, Configuring, Monitoring and Troubleshooting Cisco (Viptela) SD-WAN Course, students will deploy andconfigure SD-WAN Controllers, vEdge Devices, and Cisco IOS-XE Devices. Students will create Multiple Device and CLITemplates that will allow Hundreds of devices to be deployed using only a few Centralized Templates. Students will createSecurity Policies to enable the Enterprise Firewall, IDS/IPS, URL Filtering, and Web Layer Security to protect and allowEnterprises to deploy Cloud applications as well as Direct Internet Access (DIA). Students will also create Local and Central Policies that enable a Centralized Policy control of WAN Routing and device QOS configuration and enforcement. Students will also learn how Cisco SD-WAN allows Enterprises to deploy an effective Cloud Solutions such as Amazon AWS, Microsoft Azure, and Google Cloud. Students will also learn how to Monitor and Troubleshoot the SD-WAN Solution.

The Securing Networks with Cisco Firepower Next-Generation IPS course shows students how to deploy and use Cisco Firepower® Next-Generation Intrusion Prevention System (NGIPS). This hands-on course gives students the knowledge and skills to use the platform features and includes firewall security concepts, platform architecture and key features; in-depth event analysis including detection of network-based malware and file type, NGIPS tuning and configuration including application control, security intelligence, firewall, and network-based malware and file controls; Snort® rules language; file and malware inspection, security intelligence, and network analysis policy configuration designed to detect traffic patterns; configuration and deployment of correlation policies to take action based on events detected; troubleshooting; system and user administration tasks, and more.